Chip Tuning for MPC555 Based ECUs, DPF-EGR-AdBlue Solution Files | Automatic ECU Software Solutions with Nitro Data
Which Vehicles Is It Used In? NitroData Supported Solutions
MPC555 is a powerful microcontroller developed by Motorola (later Freescale, now NXP) and has been used as the main processor in many old generation Ford, Peugeot, Citroën and some industrial diesel ECU systems. ECUs with this processor typically work with special modification processes that require low-level hardware access.
Which Vehicles Is This ECU Model Used In?
ECUs using the MPC555 microcontroller are generally found in old generation diesel and gasoline engine vehicles. These systems are developed by Bosch and are commonly found in brands like Fiat and Alfa Romeo. Example vehicle models:
🛠 NitroData Supported Solutions
1. MPC555 Stage 1-2
Engine maps are optimized with hardware-based access, torque and power are increased.
2. MPC555 DPF/EGR OFF
In these old generation ECUs without DPF system, EGR systems can be disabled.
3. MPC555 AdBlue OFF
Not applicable as AdBlue system is not present (cannot be applied).
4. MPC555 VMAX OFF
Maximum speed limit is increased by speed limiter cancellation.
5. MPC555 Lambda OFF
Lambda control is disabled, compatibility is provided especially in CAT cancellation.
6. MPC555 Launch Control
Launch rpm limit can be set with hardware control (in supported models).
7. MPC555 CAT OFF
Catalytic converter cancellation provides freer airflow in exhaust control systems.
8. MPC555 Hardcut - Popcorn
High rpm limiter can be applied, should be used carefully in old diesel engines.
9. MPC555 PopBang
Sound effect can be provided with software modifications in limited supported models.
10. MPC555 Cold Start OFF
Cold start phase is cancelled to balance idle and engine noise.
11. MPC555 Gearbox 1-2 Optimization
Gear responses (if automatic version available) are optimized through ECU.
12. MPC555 TVA OFF
Throttle valve actuator (in systems that have it) is cancelled, faster throttle response is provided.
The Nitro Data Difference in MPC555 Based ECU File Solutions!
Editing old generation ECU files with MPC555 processor requires expertise. With Nitro Data Chip Tuning infrastructure:
Automatic Chip Tuning Solutions
Nitro Data provides the following processes with automatic solution systems for MPC555 based ECUs:
Why Nitro Data?
Don't forget the old generation in the chip tuning world! Revitalize your vehicle with Nitro Data solutions optimized for powerful but old generation processors like MPC555. All processes are completed with hardware read/write infrastructure and special automatic solution algorithms and provide you with professional solutions within seconds.